Now on to the middle knife.

After the blade is ground I start on the handle, again with the butterscotch linen Micarta.

The stainless steel guard is soldered in place and the handles are fitted.

Now to glue the handles up with epoxy and let it cure.

After shaping and sanding the handle and guard.

I shape the guard and then install the decorative stainless steel pins and start rounding them off.

More sanding and polishing and number 2 of 3 is finished.

Now on to the BIG one.

NEXT PAGE


[Home] [Trio Pg 2] [Trio Pg 3]